N Scale Logo The Space Age Plastic Construction Kit
Featuring
"TENAX-7R"
TENAX 7R PLASTIC WELDER
TENAX-7R is the best way to assemble plastic and styrene models. It achieves a superior bond by actually welding the pieces together. This means that in order for your TENAX-7R to work the parts must be in place and touching. Then you simply touch the seam with your TOUCH-N-FLOW applicator. The TENAX-7R will fuse the seam by capillary action. Hold the parts for approximately 10 seconds or until you have a firm bond. The complete weld will take about five minutes to cure but you are able to continue before a full cure is complete.

 

 



Image
 Description Part # Our Price
Tenax 7R Glue, 1 oz. bottle TEN-7R $4.99
Replacement Filler bottle TEN-Filler 5.99
Replacement Aplicator pipette "Touch-n-flow" CRU-711

6.25
Cyanoacrylate (CA) Adhesive Applicator Tool CRU-805 6.25
Fill-N-Clean CRU-720 11.96
Gentle Touch Plastic Hemostat CRU-5001 6.39
Gentle Touch Plastic Hemostat 3 pack CRU-5002 15.99
Touch-N-Flow System CRU-7000 13.45
Funnel CRU-7017 1.99
Plastic Sanding Needles -- Coarse 150 Grit pkg(8) CRU-APA401 4.79
Plastic Sanding Needles -- Medium 240 Grit pkg(8) CRU-APA402 4.79
Plastic Sanding Needles -- Fine 320 Grit pkg(8) CRU-APA403 4.79

 

To assemble your model you must remember you will be welding, not gluing. This means that in order for your TENAX-7R to work the parts must be in place and touching. Then you simply touch the seam with your TOUCH-N-FLOW applicator. The TENAX-7R will fuse the seam by capillary action. This will actually weld the parts. Now hold the parts for approximately 10 seconds or until you have a firm bond. The complete weld will take about five minutes to cure but you are able to continue before a full cure is complete.



Click here for Microbrushs


sales@nscalesupply.com