|
This vibrant,
full sound enhancement to the Kato SD40-2 and SD70M Flared (post
2009) loco is accomplished with a 100% drop-in decoder. Simply
by removing the stock circuit board from the locomotive and dropping
in MRC’s 1806 digital decoder.
Equipped
with MRC’s world renowned Brilliance™ sound, and dynamic,
super-fidelity speaker (permanently mounted on the decoder board),
the locomotive truly comes to life, from startup to shutdown.
From the
slowest “creep” to “top-end,” experience railroading
like never before. MRC’s true, live capture, full fidelity
sound includes SD40 prime mover diesel rumbles, actually recorded
(railside) from the real diesel locomotive, by MRC’s Sound
Engineers. It’s all there… all 28 NMRA available functions,
and naturally, MRC provides (16) horns, eightbells, brakes, air
releases, pop valves, cooling fans, coupling sounds and more.
Power Pack
Users aren’t left out in the cold! DC power pack users can
also enjoy the full capability of the 0001806 decoder when coupled
to MRC’s unique & exclusive BlackBox (#0001050) control
unit.
Features:
- SD40
synchronized diesel prime mover sounds
- 0.75
amp capacity
- 16 different
types of horns and 8 types of bells
- Programmable
individual sound volumes
- Programmable
either 2-digit or 4-digit addresses
- Programmable
start voltage and top voltage
- Programmable
acceleration and decelaration rates
- Programmable
14, 28, 128 speed steps
- Supports
full read back
- Selectable
factory default speed curve
- Advanced
speed table control CV67-CV94
- Kick
start voltage control CV65
- 3 headlight
effects: Directional / rule 17 /off-dim-bright cycle.
- 28 accessory
functions (F1-F28)
- Supports
advanced consisting (CV19)
- Supports
programming on the main (OPS move)
- Compatible
with NMRA DCC standards
- Complies
with Part 15 of FCC Rules
- 13mm,
32 ohm speaker included
- PCB
size: 72mm x 9.7mm x 3mm
- Directly
replaces Kato SD40-2 PC Boards
|
