N Scale LogoProduct Line: Monroe Models
Click here to vist Monroe Models Web Site


Description Picture MSRP Price Part #
Stone Arch Bridge Kit
Six piece unpainted bridge cast from a high density gypsum stone. Includes an extra part with each stone arch kit to expand the bridge to a double arch with the purchase of an additional (#9001) kit! 40 scale foot single track bridge. 1.5”H x 3”L (3.81cm x 7.62cm)

$21.95 $17.56 MON-9001
Concrete Bridge Kit
Six piece unpainted bridge cast from a high density gypsum stone. Includes highway warning signs and bridge height restriction signs! 66 scale foot single track bridge. 1.75”H x 5”L (4.45cm x 12.70cm)
$21.95 $17.56 MON-9002
Art Deco Bridge Kit
Fifteen piece unpainted bridge cast from a high density gypsum stone and lead free white metal. Includes highway warning signs and bridge height restriction signs! (not shown in photo) 66 scale foot DOUBLE TRACK bridge. 1.75”H x 5”L (4.45cm x 12.70cm)
$29.95 $23.96 MON-9003
Concrete & Girder Bridge Kit
This kit is produced in a modular design to allow you to expand this kit from a single-track bridge to a double or triple-track bridge. (With the purchase of expansion kit #9006.) The kit is made of six detailed gypsum castings producing the bridge abutments and four (lead free) white metal parts for the girders. The span of the bridge is 36 scale feet. 1-7/8”H x 6”L (4.76cm x 15.24cm)

$26.49 $21.19 MON-9005
Expansion Bridge Kit
Expand #9005 Concrete & Girder Bridge into a double track bridge or more. Includes two abutments and four white metal girders to expand the original bridge kit #9005 from a single to a double track bridge.

NOTE: Two Expansion Bridge Kits can be combined with the original #9005 to produce a triple track bridge.

$12.99 $10.39 MON-9006
Country Bridge Kit
Only available in N scale. This is a typical back roads railroad overpass. The bridge has single or double track clearance. All parts are laser cut wood with tab and slot design and full directions. Also included in this kit are highway warning signs for the road overpass. 9-1/4”L x 1-3/4”W x 2-1/4”H
$29.99 $27.96 MON-9007
Branch Line Trestle Kit
Included are one laser cut wood structure kit with easy to follow illustrated instructions and micro plywood parts. Four Cast Metal Girders. 10” L x 1-1/16” W x 2-1/8” H,
Underpass Opening 1-15/16”H x 2-3/16” W
$32.95 $26.36 MON-9008
Merchant Street Bridge Kit
The Prototype: The Merchant Street Bridge is based on bridges built in the 1920's and 30's of which many are still in use today. These bridges were made of reinforced concrete with a double track mainline traveling overhead. Many of these bridges were built to eliminate grade crossings and promote safer passage for automobiles and pedestrians in urban areas. Some of these bridges where in a simpler style, ours happens to be in a more ornate style. After all, its going down Merchant Street.

The Kit: The kit is made of a type of strong white hydrocal. It includes four wing walls, 3 piers, and a two part deck split down the center. It is a double track bridge. It also includes laser cut material for the side walks and printed roadway signs for the underpass. Complete "photo" instructions are included to make assembly and painting easy and fun!

This will make a 59 scale foot single track bridge.

Size: 4-1/2”H x 6-1/2”L x1-5/8"H (11.4cm x 16.5cm)

$31.95 $25.56 MON-9009
Hobo Creek Bridge Kit
Give your railroad hobo's a home with the Hobo Creek Bridge. Every railroad has creek that needs a small trestle. Now you can have one, or more at this price, on your railroad. Simple to follow instructions with tab and slot designed parts make assembly a snap. No measuring or cutting required. All parts are laser cut.

What's in the kit? Laser cut basswood and micro plywood parts, plus assembly instructions. You will need a hobby knife, wood glue or "super" glue, and modeling paints or stains to assemble and finish the kit. The track, scenery, and trains are not included.

Size: 4-3/4”L x 1”W x 1-1/4”H

 

$11.99 $9.59 MON-9010
Large, Scrap Yard Junk Pile
PAINTED AND WEATHERED cast resin scrap yard junk pile. Completely ready to install into your scrap metal junk yard scene. Approx. 3" in diameter.
$9.99 $7.99 MON-9101
Medium, Scrap Yard Junk Pile
PAINTED AND WEATHERED cast resin scrap yard junk pile. Completely ready to install into your scrap metal junk yard scene. Approx. 2" wide and 3" long.
$8.49 $6.79 MON-9102
Scrap Metal, 3/4 Gondola Load
Includes two PAINTED AND WEATHERED cast resin scrap yard Gondola Loads. Each load simulates a gondola that has been partly filled so it will fit in any length rail car. Completely ready to install. Fits most popular brand gondolas. Can be sanded to fit. Approx. 5/8" wide and 1-3/4" long. (Gondola car not included)
$8.49 $6.79 MON-9103
Yard Scrap Junk Pile Set
Includes one Large Junk Pile, one Medium Junk Pile, and one Gondola Load. All are PAINTED AND WEATHERED cast resin details. The Gondola Load simulates a gondola that has been partly filled so it will fit in any length rail car. Completely ready to install. Fits most popular brand gondolas. Can be sanded to fit. The Gondola Load is approx. 5/8" wide and 1-3/4" long. The Large Junk Pile is approx. 3" in diameter and the Medium Junk Pile is approx. 2" wide by 3" long.


$17.99 $14.39 MON-9104
Automobile Junk, Scrap Yard Pile (Painted)
$10.49 $8.39 MON-9106
Transfer Shed w/Dock Kit
This kit is slightly smaller than the Trackside Transfer Shed listed above. The kit is typical of “small town America” railroads. It includes precision tab and slot wood walls, Tar paper roofing, white metal detail parts, water slide decals, vintage signs and a laser cut wood loading dock with ramp. 2-15/16"L x 1-13/16"W x 1-13/16"H Note: With the purchase of two kits this building can be doubled in length.


$28.49 $22.79 MON-9202
Loading Ramps
Unload all your heavy equipment with these prototypical railroad loading ramps. Precision laser cut wood parts are included with tab and slot construction for easy, quick, and sturdy construction. (2 docks in the package) 3-1/2”L x 3/4”W x 3/8”H
New: Aug 2005

$11.99

$9.59

MON-9203
Jurgens Junk Yard
Loading this kit with details makes this Quonset hut a must have for every railroad town. In the kit are precision laser cut wood walls with tab and slot construction, real corrugated metal roofing, vintage advertising signs, numerous white metal parts, a cast resin junk pile and metal fencing for the Junk Yard. 3-1/2”L x 2-1/2”W x 1-5/8”H
New: Aug 2005

$34.99

$27.99

MON-9204
Ellie's House Kit
You remember Ellie's House. Not far from the tracks and across the street from the depot. As a kid you saw her sitting on the front step or looking out the bay window whenever a train would arrive in town.

The kit is based on a Victorian era Gothic House of the late 1800's. It is made of precision laser cut bass wood, and fiber board materials. It includes cast metal chimneys, peel and stick windows and trim, plus laser cut window glazing. The roof is etched with simulated cedar shake shingles so no assembly of tiny shingles is required. Now all you need to do is choose Ellie's paint scheme and use wood glue for assembly.
3-5/8”L x 2-5/8”W x 2-1/4”H
New: Aug 2009


$34.99

$27.99

MON-9205
Speeder Shed Kit
The model is based on a typical speeder shed or tool house found on most
railroads but elevated with a trestle underneath for construction on a
slope. It can also be assembled on a flat section of land. The typical
Speeder Shed is where the railroad stored maintenance parts, extra signs,
tools, hand cars, velocipedes, and in later years, motorized speeders. The
shed was positioned on a section of track where a crew could be called out
to inspect and do small repairs to the track within its section.

The kit includes laser cut bass wood, micro plywood, and fiber board parts. Also
included are peel and stick trim and door, and roofing parts plus printed
signs, and laser cut details. Assembly is made easy by tab-and-slot parts.
Diagrams and photo instructions explain not only how to build the model
but how to paint the structure for a realistic new look or an old weathered
finish.1-3/4 x 1-5/8 x 1-3/8"

New: Aug 2009


$17.95

$14.39

MON-9206
Overhead Gantry Crane Kit
Every railroad needs an overhead crane to lift heavy objects from railcars to trucks for delivery to its final destination. They're ideal for use at team tracks and at large industries. This kit, based on an actual prototype erected in the 1930's, features unpainted lead-free white-metal and resin parts that are easily assembled using CA glue.

$12.99

$10.39

MON-9301


sales@nscalesupply.com