The Handibond THIN cyanoacrylate adhesive bonds instantly. It is formulated with a water thin viscosity and fast curing speed that is often required for time sensitive projects. Handibond THIN is able to achieve good penetration into hairline gaps due to its thin viscosity, and it is able to form a deep bond from the inside out. Handibond THIN is also a perfect wood putty replacement when combined with sawdust. The advantage of the cured THIN and sawdust combination is that it sets fast and is completely sandable.

• Fast cure speed (3-5 seconds)
• Repairs hairline cracks with penetrating characteristics
• Applications: rubber, metals, balsa, plywood, plastics, cracked marbles, hairline gap filling, wood putty replacement when combined with sawdust

The Handibond THICK cyanoacrylate adhesive is a thick viscosity, extremely suitable for large gab filling. Handibond THICK has a medium cure speed, ideal for projects requiring extra adjustment time. When a thin layer of Handibond THICK is applied between two surfaces and comes into contact with atmospheric moisture, a rapid polymerization occurs producing the ultimate bond. Combined usage with an Accelerator is recommened for increasing curing speed and bonding strength.

• Medium cure speed allows for enough time to adjust materials into place before polymerization (20-45 seconds)
• Applications: rubber, metals, aluminum, wood, textiles, plastics, filling large gaps

The Handibond RUBBER TOUGHENED cyanoacrylate is a medium viscosity, flexible and shock-absorbing adhesive. This specially formulated adhesive with added rubber provides the power of flexibility and strong shock absorption. The Handibond RUBBER TOUGHENED cyanoacrylate adhesive bonds metals, rubber and fiberglass.

• Shock absorption and flexibility
• Excellent for R/C tires, speakers, electric motor assembly
• Applications: rubber, fiberglass, metals, aluminum, wood, plywoods, plastics

The Handibond ODORLESS is a special non-frosting clear curing formula with no fumes to irritate the eyes or nose. This adhesive is a completely foam safe product forumlated in both the thin and thick viscosities, ideal for gap penetration or gap bridging. Handibond ODORLESS does not attack foam and is ideal for repairing foam and gluing clear plastics.

• Completely foam safe
• Non-frosting, no fumes
• Clear, clean finish
• Applications: gluing clear plastics, foam

The Handibond PLASTIC cyanoacrylate adhesive has a medium viscosity and was specifically developed by Handibond for all bondable plastics. The Handibond PLASTIC is superior for all industrial types of plastics and other materials such as rubber, EPDM, nylon, polycarbonate and much more. Handibond PLASTIC's special formula has a rapid curing speed, allowing for quick construction of any task.

• Applications: plastic, rubber, EPDM

The Handibond GEL cyanoacrylate adhesive is ideal for bonding porous surfaces. Handibond GEL has a thicker viscosity and is suitable for large gap filling and for any job requiring a on-runny adhesive, such as those applications on vertical or difficult ot reach surfaces. Use with an Accelerator to increase curing speed and bonding strength. Handibond GEL adhesive is available in large 20gm tubes and convenient 3 gm tubes.

• For large gap filling, vertical or rough surfaces
• Non-runny
• Applications: rubber, metals, carbon, aluminum, wood, textiles, plastics

The Handibond ACCELERATOR is designed to work with Handibond cyanoacrylate adhesives to speed up the setting process when a faster setting time is necessary. A small quantity of Handibond ACCELERATOR will set the adhesive in just a second. The Handibond ACCELERATOR will prevent the adhesive being absorbed by a porous surface or run out from gaps between the parts. Recommended combine usage with Handibond cyanoacrylate adhesives only.

• Accelerate curing speed within gaps
• Enable cyanoacrylate adhesive to bond to porous surface
• Reduces blooming or fogging of the adhesives
• Allows cyanoacrylate adhesive to cure on acidic surfaces, such as wood or aged PVC