|
DN143K2 FOR KATO
RDC
1.0 Amp, 2 FX3
Function Decoder
|
| Part #DIG-DN143K2 |
N Scale Supply Price: $40.49 |
| New: May 2007 |
|
| Performance |
DIGITRAX LocoMotion(tm) System
makes your locomotives run like the real thng with Torque Compensation, 128 Speed
Steps, Momentum, Switching Speeds, Selectable Normal Direction of travel and more. |
| Lights |
RDC Special Lighting: 3 light
boards included with decoder, lights reverse automatically with
loco direction changes, yellow lights show in the direction of
travel and red lights show in the opposite direction.
|
| Current Rating |
1.0 Amp (1.5 Amps peak) |
| Size |
For Kato N RDC |
| Installation |
3 part decoder with
main body connected to two lamp boards |
| Function Outputs |
2-125mA |
| Function Type |
| FX3: |
- Turn functions on and off.
- Head lights and tail lights are automatically
reversing unless you make them independent.
- All function outputs have FX generators for
prototypical lighting effects and have qualifiers for FX effects and qualifiers
for standard on/off functions.
- All Digitrax Series 3 decoders have FX3 type
functions.
- FX3 decoders offer full function remapping
so you can choose which function (F0-F12) controls each function lead.
- FX3 decoders offer master light switch capability.
- FX3 decoders offer qualifiers for FX function
operation qualified by one of the following: the loco's direction of travel, whether
F0 is on or off, loco direction and F0, or whether the loco is moving or not.
These qualifiers are also available on function outputs that are used as standard
on/off functions.
|
|
| Features |
| Series 3: |
- Standard
S Turn functions on and off. Head lights and tail lights
are automatically reversing unless you make them independent.
- Standard
Turn functions on and off.
- Configurable
Strobe CS Turn functions on and off. Head lights and
tail lights are automatically reversing unless you make
them independent. Set up functions as single or double
pulse strobes to simulate different lighting effects
in the locomotive. The CS option is available in decoders
where there were not enough resources to allow for full
FX functions.
- Digitrax
Real FX FX Turn functions on and off. Head lights and
tail lights are automatically reversing unless you make
them independent. Use up to 4 FX generators for creating
prototypical lighting effects like Mars lights, ditch
lights, Gyra lights, rotating beacon, single & double
pulse strobe lights and random flicker. These effects
can be customized for maximum realism using FX qualifiers.
FX decoders do not offer qualifiers for function leads
used as standard on/off leads.
- Digitrax
Real FX3 Turn functions on and off. Head lights and
tail lights are automatically reversing unless you make
them independent. All function outputs have FX generators
for prototypical lighting effects and have qualifiers
for FX effects and qualifiers for standard on/off functions.
All Digitrax Series 3 decoders have FX3 type functions.
FX3 decoders offer full function remapping so you can
choose which function (F0-F12) controls each function
lead. FX3 decoders offer master light switch capability.
FX3 decoders offer qualifiers for FX function operation
qualified by one of the following: the loco's direction
of travel, whether F0 is on or off, loco direction and
F0, or whether the loco is moving or not. These qualifiers
are also available on function outputs that are used
as standard on/off functions.
|
|
| Full Spec Sheet |
To
View the Full Specification Sheet from the Digitrax Web Site click
here |
| Instructions |
To
View the instruction sheet (.pdf) from the Digitrax web site click
here |
Back to N Scale Supply catalog page for : Digitrax Mobile Decoders
Back to N Scale Supply catalog page for : Digitrax
|
